Window Regulator: Service and Repair
Removal and InstallationAll vehicles
1. Remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL.
2. Remove the screw and the front door trim panel bracket.
3. Position the water shield aside.
Vehicles with power windows
4. Connect the window control switch electrical connector.
5. Connect the battery. Refer to BATTERY DISCONNECT.
All vehicles
6. Lower the front door window glass to gain access to the screws.
Vehicles with power windows
7. Disconnect the battery. Refer to BATTERY DISCONNECT.
8. Disconnect the window control switch electrical connector.
All vehicles
9. Remove the front door window glass screws.
10. Support the front door window glass in the full up position.
Vehicles with power windows
11. Disconnect the front door power window regulator motor electrical connector.
12. Remove the front door power window regulator assembly.
1. Remove the bolts.
2. Remove the nuts.
Vehicles with manual windows
13. Remove the front door window regulator assembly.
1. Remove the bolts.
2. Remove the nuts.
All vehicles
14. To install, reverse the removal procedure.
- Cycle the door window glass to make sure of correct door window glass engagement.