Tail Lamp: Service and Repair

REAR COMBINATION LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the rear side trim. (Right side only)




3. Remove in the order indicated below.
1. Connector
2. Screw
3. Rear combination light
(See Rear Combination Light Removal Note)
4. Socket
(See Socket Installation Note)
5. Brake light/taillight bulb
6. Rear turn light bulb
7. Back-up light bulb
8. Taillight bulb

4. Install in the reverse order of removal.

Rear Combination Light Removal Note




1. Slide the rear combination light outward from the vehicle and disengage the attachment pins.

Socket Installation Note




1. Hook the harness as shown in the figure.