B1883

Pinpoint Test 9: LFC 18/DTC B1883 - PASSENGER PRETENSIONER CIRCUIT SHORT TO GROUND

Normal Operation
The restraints control module (RCM) monitors the circuit to the passenger seat belt buckle pretensioner. When the RCM detects a circuit short to ground it will set lamp fault code (LFC) 18 and diagnostic test code
(DTC) B1883.

Possible Causes
A passenger pretensioner circuit short to ground can be caused by:
- a short to battery or ignition on circuit (Y/R).
- a short to battery or ignition on circuit (Y/B).
- a short to battery or ignition on the passenger pretensioner.
- an RCM internal concern.

WARNING: If the supplemental restraint system (SRS) is being serviced, the system must be deactivated and restraint system diagnostic tools must be installed.

The air bag restraint system diagnostic tools must be removed and the air bag modules reconnected when the system is reactivated to avoid non-deployment in a collision, resulting in possible personal injury.

NOTE: Diagnostics or repairs are not to be performed on a seat equipped with a seat side air bag with the seat in the vehicle. Prior to attempting to diagnose or repair a seat concern when equipped with a seat side air bag, the seat must be removed from the vehicle and the restraint system diagnostic tools must be installed in the seat side air bag electrical connectors. The restraint system diagnostic tools must be removed prior to operating the vehicle over the road.

NOTE: After diagnosing or repairing an SRS, the restraint system diagnostic tools must be removed before operating the vehicle over the road.

NOTE: After diagnosing or repairing a seat system, the restraint system diagnostic tools must be removed before operating the vehicle over the road.

NOTE: The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

Step 1 - 3:

Step 4 - 5: