Front Door Hinge: Adjustments
HINGE ADJUSTMENT - FRONT DOORLH and RH sides
NOTE: Make sure the rear door is within specification before making any adjustments to the front door.
1. Remove the fender.
2. Mark the positions of the front door hinges to use as reference points.
3. Loosen the two front door hinge to-body bolts just enough to permit movement.
4. Remove the A-pillar lower trim panel.
1. Remove the pin-type retainer.
2. Remove the A-pillar lower trim panel.
LH Side
1. Position the central junction box (CJB) aside;
1. Remove the nuts.
2. Position the CJB aside.
RH Side
1. Position the inertia fuel shutoff (IFS) switch bracket aside.
1. Remove the bolts.
2. Position the bracket aside.
LH and RH Sides
1. Loosen the lower door hinge bolt just enough to permit movement.
2. Adjust the front door to specification.
3. Tighten the three front door hinge to body bolts.
LH Side
1. Install the CJB.
1. Position the CJB.
2. Install the nuts.
RH Side
1. Install the IFS bracket.
1. Position the bracket.
2. Install the bolts.
LH and RH Sides
1. Install the A-pillar lower trim panel.
1. Position the A-pillar lower trim panel.
2. Install the pin-type retainers.
2. Install the fender.