B-Pillar Trim Panel

Removal and Installation

NOTE: Inspect the safety belt D-ring cover for damage. If the safety belt D-ring cover does not remain in place, install a new cover.




1. Remove the safety belt D-ring cover.




2. Remove the safety belt D-ring bolt.
3. Position the front and rear door weatherstrips aside.




4. Remove the upper B-pillar trim panel.




5. Remove the front door scuff plate trim panel.
1. Remove the pin-type retainers.
2. Remove the front door scuff plate trim panel.




6. Remove the rear door scuff plate trim panel.
1. Remove the pin-type retainers.
2. Remove the rear door scuff plate trim panel.




7. Remove the lower B-pillar trim panel.
8. To install, reverse the removal procedure.