Rear Seat Cushion Disassembly/Assembly
REAR SEAT CUSHIONDisassembly and Assembly
NOTE: 60% split bench seat shown, 40% and bench seat similar.
1. Lift up the rear seat cushion.
2. Remove the rear seat cushion.
- Pull up on release lever and slide the seat out of the floor bracket.
3. Release the J-retainer.
4. Unzip the rear seat cushion trim.
5. Remove the rear seat cushion trim from the rear seat cushion pad.
6. Remove the rear seat cushion bracket.
1. Remove the two bolts.
2. Remove the rear seat cushion bracket.
7. To assemble, reverse the disassembly procedure.