Cruise Control Servo: Service and Repair

SPEED CONTROL ACTUATOR

REMOVAL AND INSTALLATION

1. Disconnect the battery ground cable. For additional information, refer to BATTERY DISCONNECT.




2. Release the cruise control cable cap.
1. Squeeze the cruise control cable cap retaining tab.
2. Rotate the cruise control cable cap.




3. Remove the cruise control cable.
1. Depress the spring retainer.
2. Slide the core wire end out of the cruise control servo pulley and remove the cruise control cable.




4. Remove the cruise control actuator assembly.
1. Disconnect the electrical connector.
2. Separate the wire harness from the bracket.
3. Remove the nuts.




5. Remove the bolts and separate the cruise control actuator from the bracket.
6. To install, reverse the removal procedure.