Engine Inspection

ENGINE INSPECTION

1. Verify the customer concern by operating the engine to duplicate the conditions.
2. Visually inspect for obvious signs of mechanical and electrical damage.
3. If the inspection reveals obvious concerns that can be readily identified, repair as required.
4. If the concern is not visually evident, verify symptom and refer to SYMPTOM TROUBLESHOOTING CHART - ENGINE. Symptom Troubleshooting Chart

Inspection and Verification

Since diagnosis and testing actually begins when repairs are taken on, the following procedure is recommended.

1. Verify the customer concern by operating the system.

Visual Inspection Chart:

2. Visually inspect for obvious signs of mechanical damage or electrical damage. If the concern cannot be reproduced, carry out a road test and/or visual check with the aid of the following table.
3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the concern is not visually evident, verify the symptom and refer to the Troubleshooting Index.