Instrument Cluster Finish Panel Removal and Installation

Removal and Installation

1. Disconnect the battery ground cable. For additional information, refer to BATTERY DISCONNECT.




2. Lower the glove compartment
1. Press the glove compartment release tabs inward while pulling downward on the glove compartment.




3. Disconnect the climate control cable
1. Position the locator pin.
2. Release the locking tab.
3. Disconnect the climate control cable from the blend door shaft.




4. Remove the instrument cluster finish panel.
1. Remove the screws.
2. Remove the instrument cluster finish panel.
3. Disconnect the electrical connectors.

5. To install, reverse the removal procedure.