Headlamp: Service and Repair

HEADLAMP ASSEMBLY

Removal and Installation

NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.

1. Remove the front bumper cover. Refer to FRONT BUMPER COVER.

NOTE: Pull headlamp assembly forward to access electrical connectors.




2. Remove the headlamp assembly.
1. Remove the three bolts.
2. Loosen the nut.
- Disconnect the electrical connectors.

3. To install, reverse the removal procedure.
- If necessary, adjust the headlamps. For additional information, refer to HEADLAMP ADJUSTMENT - PHOTOMETRIC AIMING or HEADLAMP ADJUSTMENT - SCREEN METHOD AIMING.