Accelerator Cable

ACCELERATOR CABLE

Removal and Installation

WARNING: Make sure surrounding components such as wiring, hoses, sound insulation and floor carpeting are not contacting the sliding inner cable of the accelerator cable or the accelerator pedal and shaft. Failure to follow these instructions may result in personal injury.




1. Disconnect the accelerator cable from the throttle lever and bracket.
1. Disconnect the accelerator cable from the throttle lever.
2. Disconnect the accelerator cable from the bracket.




2. Disconnect the accelerator cable from the pedal.

CAUTION: Do not pull the accelerator cable out by the cable housing.




3. Remove the accelerator cable.
1. Remove the bracket bolt.
2. Disconnect the accelerator cable from the air cleaner outlet tube.
3. Remove the accelerator cable from the dash panel.

NOTE: To ease installation, remove the grommet from the throttle lever and install it onto the accelerator cable end.

4. To install, reverse the removal procedure.