Recall 07V157000: ABS Module Connector Defect

MAKE/MODELS: MODEL/BUILD YEARS:

Mazda/Tribute 2001-2004

MANUFACTURER: Mazda Motor Corp.

NHTSA CAMPAIGN ID NUMBER: 07V157000 MFR'S REPORT DATE: March 30, 2007

COMPONENT: Service Brakes, Hydraulic: Antilock: Control Unit/Module

POTENTIAL NUMBER OF UNITS AFFECTED: 95300

SUMMARY:
On certain sport utility vehicles equipped with ANTILOCK Brakes (ABS), the ABS module connector may have missing or dislodged wire seals. this condition could allow contamination to enter the module connector, creating a potential for an electrical short.

CONSEQUENCE:
An electrical short might cause an ABS malfunction that would illuminate the ABS warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. This condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.

REMEDY:
Dealers will inspect the wire harness connector to the ABS module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. The dealer will also inspect the connector on the ABS module and replace it if it is found to be corroded or damaged. The recall began on April 30, 2007. Owners may contact Mazda at 1-800-222-5500.

NOTES:
Mazda recall No. 4507C. Customers may also contact The National Highway Traffic Safety Administration's Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to http://www.safercar.gov.