Bolt Inspection

BOLT INSPECTION





1. Measure the length of each bolt.
^ If it exceeds the specification, replace the bolt.
Bolt length (mm (in))
Cylinder head bolt (With washer)
Standard: 149.2-149.8 (5.87-5.90)
Maximum: 150.5 (5.91)
Cylinder head bolt (Without washer)
Standard: 145.2-145.8 (5.72-5.74)
Maximum: 146.5 (5.77)
Connecting rod bolt
Standard: 44.7-45.3 (1.75-1.78)
Maximum: 46.0 (1.81)
Main bearing cap bolt (Plastic region tightening bolt only)
Standard: 110.0-110.6 (4.33-4.35)
Maximum: 111.3 (4.38)