Door Lock Control Module

DOOR LOCK CONTROL MODULE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the glove compartment.




3. Remove the bolt.
4. While inclining the door lock control module along the body panel in the direction indicated by the arrow, disengage the bracket tab from the hole in the body panel.
5. Disconnect the door lock control module connector.
6. Remove the door lock control module.




7. Remove the screw, then remove the bracket.

NOTE: The screw which fixes the door lock control module and bracket is for a body ground connection. Be sure to secure the screw when installing.

8. Install in the reverse order of removal.