Transmission Temperature Sensor/Switch: Service and Repair

TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR REMOVAL/INSTALLATION [JA5A-EL]
1. Remove the automatic transaxle.
2. Disassemble the automatic transaxle, and then remove the TFT sensor.
3. Install the TFT sensor, and then assemble the automatic transaxle.
4. Remove the automatic transaxle.
5. Carry out the line pressure test.
6. Inspect the operation of the TR switch.
7. Inspect the operation of the selector lever.
8. Carry out the mechanical system test.
9. Carry out the road test.