Steering: Service Precautions

Wheels and Tires Removal / Installation Note
The removal and installation procedures for the wheels and tires are not mentioned in this section.
Tightening torque 135 Nm (13.8 kgf-cm, 100 ft. lbs.)

Power Steering Components Removal / Installation Note
If any power steering fluid line has been disconnected anytime during the procedure, add ATF MIII or equivalent (e.g. MERCON), bleed the fluid lines, and inspect for leakage after the procedure has been completed.

Connectors Disconnection / Connection Note
Disconnect the negative battery cable before doing any work that requires handling of connectors. Connect the negative battery cable only after the work is completed.