System Specifications

Cylinder Head Torque & Sequence

1. Position the cylinder head gasket and the cylinder head.





2. Install the 12 mm bolts and tighten in the sequence shown.





3. Install the two 8 mm bolts.





4. Tighten the eight 12 mm bolts in the sequence shown in two stages.
^ Stage 1: Tighten the bolts 80 degrees.
^ Stage 2: Tighten the bolts an additional 80 degrees.

Head Bolt Reuse/Replace
Note:
^ Reuse cylinder head bolts

Camshaft Pulley/Gear Torque






Exhaust Manifold RH torque and sequence





Tighten the nuts in the sequence shown.

Exhaust Manifold LH torque and sequence





Tighten the nuts in order shown.