B. 4-Wheel Alignment

1. Perform 4-wheel alignment using the alignment specifications (alignment specs are in degrees) table above.

2. Check for deformation of control arms, brackets, and bushings.

- If any item is out of specification, adjust front or rear toe-in within specification and repair any deformation of control arms, brackets, and bushings.

- If all items are within specification and vehicle still pulls, proceed to "C. FRONT UPPER CONTROL ARM REPLACEMENT".

3. Test drive vehicle.

- If pull/drift is eliminated, return vehicle to customer.

- If pull/drift is not eliminated, proceed to "C. FRONT UPPER CONTROL ARM REPLACEMENT".