Attachment I - Dealer Information

CONDITION OF CONCERN

On certain Mazda6 vehicles it is possible that a crack may occur in the soldered part of the IC terminal in the fan control module causing poor continuity. Under this condition the cooling fan may stop operating causing the coolant temperature to rise or a fan noise from the module.





SUBJECT VEHICLES

OWNER NOTIFICATION

Mazda will notify U.S. owners by first class mail beginning April 9 2007.





PARTS INFORMATION





WARRANTY CLAIM PROCESSING INFORMATION

RENTAL CAR





A rental car may be provided to the customer if eligible based on the terms and conditions of the Rental Car Reimbursement Program policy 12.0. Rental car reimbursements are available only on 2001 and newer vehicles within the mileage and time limitations under the New Vehicle Limited Warranty. If the customer was placed in a rental car while the campaign was being completed submit a separate claim/problem using the standard rental claim information.

Rental expenses exceeding the two-day limit will require prior DCSM Authorization, as outlined in the Rental Car Reimbursement Program policy.

VERIFY THE VEHICLE NEEDS THE SSP





1. Verify the vehicle is within the ranges shown.

^ If the vehicle is within the above ranges, go to step 2.

^ If vehicle is not within the above ranges, return it to the customer.

2. Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect vehicle for an Authorized Modification Label SSP 71 attached to the vehicle's bulkhead.





eMDCS System - Vehicle Status Inquiry Results

Note:
Verify the SSP number as the vehicle may have multiple labels.

REPAIR PROCEDURE

Please refer to Attachment II.