Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2005 >> B2300 L4-2.3L VIN D >> Repair and Diagnosis >> Body and Frame >> Fender >> Front Fender >> Front Fender Liner >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Fender Liner: Service and Repair

FENDER SPLASH SHIELD

Removal and Installation






NOTE: The RH fender splash shield electrical connector locators must be disconnected from the splash shield prior to splash shield removal. The LH tender splash shield vacuum lines must be disconnected from the vacuum storage reservoir prior to splash shield removal.

1. Remove the 3 push-pins from inside the fender splash shield.






2. Remove the 2 bolts from the lower front of the fender splash shield.






NOTE: The LH front fender splash shield is equipped with 1 bolt and 1 nut. The RH front fender splash shield is equipped with 2 bolts.

3. Remove the bolt and the nut from the front fender splash shield.






4. Remove the 5 push-pins from the front fender splash shield-to-inner splash shield.
- Remove the inner splash shield.






5. Remove the push-pin from the lower rear splash shield.
6. Remove the front fender splash shield.
7. To install, reverse the removal procedure.
pro multis · About Operation CHARM