Coolant Temperature Sensor/Switch (For Computer): Service and Repair

ENGINE COOLANT TEMPERATURE SENSOR REMOVAL / INSTALLATION

1. Disconnect negative battery cable.
2. Partially drain the cooling system.
3. Disconnect engine coolant temperature (ECT) sensor connector.

NOTE: The 2.3L engine has a CHT sensor. See CYLINDER HEAD TEMPERATURE (CHT) SENSOR REMOVAL / INSTALLATION - 2.3L.







4. Remove the ECT sensor.

5. To install, reverse the removal procedure.

Tightening torque: 16-24 N.m { 1.6-2.4 kgf.m, 12-17 ft.lbf}