PID/Data Monitor and Record Procedure/Active Command Modes Procedure

PID/Data Monitor and Record Procedure





1. Connect WDS or equivalent to the vehicle DLC-2 connector.
2. Access and monitor PIDs by WDS or equivalent.

Active Command Modes Procedure





Note:
^ When driving, the ABS motor and each valve automatically turn ABS-POWER on, and then each command on. ABS-POWER regulates the power supply for the ABS motor and 8 valves.

1. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector.
2. Turn the ignition switch to ON (Engine OFF) or start engine.
3. Activate active command modes using WDS or equivalent