Vehicle Speed Sensor Removal/Installation (Without ABS) [A65M-R]

VEHICLE SPEED SENSOR REMOVAL/INSTALLATION (WITHOUT ABS) [A65M-R]

1. Disconnect the negative battery cable.
2. Remove the battery and battery tray.
3. Remove the under cover.
4. Disconnect the vehicle speed sensor connector.
5. Remove the vehicle speed sensor.
6. Apply transaxle oil to a new O-ring and install it on a vehicle speed sensor.
7. Install the vehicle speed sensor,
Tightening torque 7.8 - 11.0 Nm (80 - 112 kgf-cm, 57.6 - 81.1 inch lbs.)
8. Connect the vehicle speed sensor connector.
9. Install the under cover.
10. Install the battery and battery tray.
11. Connect the negative battery cable.