Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2006 >> Mazdaspeed6 L4-2.3L Turbo >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Neutral Safety Switch >> Service and Repair >> Vehicle Speedometer Sensor Removal & Installation (Without ABS) [A65M-R]
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Vehicle Speedometer Sensor Removal & Installation (Without ABS) [A65M-R]

VEHICLE SPEEDOMETER SENSOR REMOVAL/INSTALLATION (WITHOUT ABS) [A65M-R]
1. Disconnect the negative battery cable.
2. Remove the battery and battery tray.
3. Remove the under cover.
4. Disconnect the vehicle speedometer sensor connector.
5. Remove the vehicle speedometer sensor.
6. Apply transmission oil to a new O-ring and install it on a vehicle speedometer sensor.
7. Install the vehicle speedometer sensor.
Tightening torque 7.8 - 11.0 Nm (80 - 112 kgf-cm, 57.6 - 81.1 inch lbs.)
8. Connect the vehicle speedometer sensor connector.
9. Install the under cover.
10. Install the battery and battery tray.
11. Connect the negative battery cable.


pro multis · About Operation CHARM