Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2006 >> Mazdaspeed6 L4-2.3L Turbo >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Temperature Sensor/Switch >> Service and Repair >> Transaxle Fluid Temperature (TFT) Sensor Removal/Installation [FS5A-EL]
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transaxle Fluid Temperature (TFT) Sensor Removal/Installation [FS5A-EL]

TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR REMOVAL/INSTALLATION [FS5A-EL]





Warning:
^ When the transaxle and ATF are hot, they can badly burn. Turn off the engine and wait until they are cool before replacing the ATF.

1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Drain the ATF.
4. Remove the oil pan.
5. Remove the primary control valve body.
6. Remove the coupler component.
7. Install the coupler component.
8. Install the primary control valve body.
9. Install the oil pan.
10. Install the under cover.
11. Connect the negative battery cable.
12. Add ATF.
13. Perform the mechanical system test.
14. Perform the road test.
pro multis · About Operation CHARM