U2064

DTC U2064[INSTRUMENT CLUSTER]

Detection Condition / Possible Cause:

Diagnostic Procedure

1. Verify the freeze frame data.




1. Connect the IDS(laptop PC) to the DLC-2

NOTE: Freeze frame data of the instrument cluster can be displayed by the IDS (laptop PC)

2. After set up the IDS (laptop PC) (including the vehicle recognition), the following can be selected from the IDS (laptop PC) screen
- Select the "Toolbox" tab.
- Select "Electrical".
- Select "IC Service Functions".
- Select Freeze Frame Data




2. Determine which unit is thought to be malfunctioning based on the freeze frame data.

NOTE: If several warning light illumination requests are received, they will be recorded in one freeze frame data.

3. Inspect the malfunctioning part.
- Repair or replace if necessary.

4. Clear the DTC from the memory.
5. Turn the ignition switch to the LOCK position.
6. Turn the ignition switch to the ON position.
7. Verify that the DTC U2064 is displayed using the M-MDS.
- If DTC U2064 is displayed, go back to Step 1.