A-Pillar Trim Removal/Installation

A-PILLAR TRIM REMOVAL/INSTALLATION

1. Remove the A-pillar lower trim






2. Partially peel back the seaming welt.
3. Remove clips A using a fastener remover.
4. Pull the A-pillar trim outward and remove clip B from the grommet (1).
5. Slide the A-pillar trim upward and remove clip B from the A-pillar trim (2).






6. Pull clip B out, then rotate 45 01|.
7. Pull clip B and remove it from the grommet.
8. Install clip B to the A-pillar trim.
9. Install in the reverse order of removal.