B-Pillar Upper Trim Removal/Installation
B-PILLAR UPPER TRIM REMOVAL/INSTALLATION1. Remove the following parts:
1. Front seat belt upper anchor installation bolt
2. Front scuff plate inner
3. Rear scuff plate inner
4. B-pillar lower trim
2. Partially peel back the seaming welt.
3. Remove the screw.
4. Pull the B-pillar upper trim outward and detach clip A and locator pin B.
5. Pull the B-pillar upper trim downward and detach the tabs and clip C.
6. Remove the B-pillar upper trim.
7. Turn the clip installed on the body 90° in the direction indicated by the arrow in the figure and pull them out.
8. Remove clip C from the body, then install it to the B-pillar upper trim.
9. Install in the reverse order of removal.