C-Pillar Trim Removal/Installation

C-PILLAR TRIM REMOVAL/INSTALLATION

1. Remove the following parts:
1. Rear scuff plate inner
2. Rear seat
3. Sub trunk box
4. Trunk end trim
5. Trunk side trim

2. Partially peel back the seaming welt.






3. Remove the screw.
4. Pull the C-pillar trim outward and detach clip A and pins B, C.
5. Pull the C-pillar upper trim downward and detach the tabs and clip D
6. Remove the C-pillar trim.






7. Turn the clip installed on the body 90° in the direction indicated by the arrow in the figure and pull them out.
8. Remove clip D from the body, then install it to the C-pillar trim.
9. Install in the reverse order of removal.