D-Pillar Trim Removal/Installation

D-PILLAR TRIM REMOVAL/INSTALLATION

1. Remove the following parts:
1. Rear scuff plate inner
2. Rear seal
3. Sub trunk box
4. Trunk end trim
5. Trunk side trim

2. Partially peel back the seaming welt.






3. Remove the fastener.
4. Pull the D-pillar trim outward and detach clips A and pin B.
5. Pull the D-pillar trim upward and detach book C.
6. Remove the D-pillar trim.
7. Install in the reverse order of removal.