Keyless Control Module [Advanced Keyless System]

KEYLESS CONTROL MODULE REMOVAL/INSTALLATION[ADVANCED KEYLESS SYSTEM]

NOTE:
- If the keyless control module is replaced, always perform the following procedure.
Without immobilizer system
- Card key programming.
- Steering lock unit programming.

With immobilizer system
- Card key programming.
- Steering lock unit programming.
- Immobilizer system resetting (with immobilizer system).




1. Disconnect the negative battery cable.
2. Remove the front side trim.
3. Disconnect the keyless control module connector.
4. Remove the bolt, then remove the keyless control module.
5. Install in the reverse order of removal.