Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> CX-7 AWD L4-2.3L Turbo >> Repair and Diagnosis >> Maintenance >> Wheels and Tires >> Tire Monitoring System >> Testing and Inspection >> Scan Tool Testing and Procedures >> Active Command Modes Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Active Command Modes Procedure

Active Command Modes Procedure





1. Connect the M-MDS to the DLC-2 connector.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
^ When using the IDS (notebook PC)
1. Select the "Toolbox" tab.
2. Select "DataLogger".
3. Select "Module".
4. Select "IC".

^ When using the PDS (pocket PC)
1. Select "Module Tests".
2. Select "IC".
3. Select "DataLogger".

3. Select the active command modes from the PID table.
4. Perform the active command modes, inspect the operations for each parts. If there is no operation sound from the relay, motor, and solenoid after the active command mode inspection is performed, it is possible that there is an open or short circuit in the wiring harness, relay, motor or solenoid, or sticking and operation malfunction.
pro multis · About Operation CHARM