Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> CX-7 AWD L4-2.3L Turbo >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Procedures >> Transfer Oil Cooler Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transfer Oil Cooler Removal/Installation

TRANSFER OIL COOLER REMOVAL/INSTALLATION
1. Disconnect the propeller shaft from the transfer side.
2. Drain the engine coolant.
3. Drain the transfer oil into a suitable container.
4. Remove in the order indicated in the figure.
5. Install in the reverse order of removal.
6. Perform the following procedure, if the transfer has been overhauled and installed to the vehicle.
(1) After warming up the engine, drive the vehicle and inspect for oil leakage and abnormal noise.




pro multis · About Operation CHARM