Rear Door Window Regulator: Service and Repair

REAR POWER WINDOW REGULATOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the sail garnish.
3. Remove the rear door garnish.
4. Remove the rear door trim.
5. Remove the rear door speaker.
6. Remove the rear door glass.
7. Remove the power window motor.






8. Remove the nuts.






9. Insert a hand through the speaker installation hole, rotate the drum housing in the direction shown in the figure to detach the tabs from the rear door unit.






10. Remove the rear power window regulator through the speaker installation hole.
11. Install in the reverse order of removal.

CAUTION: Make sure the cable does not unspool from the drum housing when installing.