Brake Rotor/Disc: Specifications
RearRear disc plate runout limit 0.05 mm (0.002 in)
Minimum rear disc plate thickness after machining using a brake lathe on-vehicle 16.8 mm (0.66 in)
Minimum rear disc plate thickness 16 mm (0.63 in)
Thickness variation limit 0.015 mm (0.0005 in)
Do not exceed minimum disc plate thickness.
Front
Front disc plate runout limit 0.05 mm (0.002 in)
Thickness variation limit 0.015 mm (0.0005 in)
Minimum front disc plate thickness 26 mm (1.03 in)
Minimum front disc plate thickness after machining using a brake lathe on-vehicle 26.8 mm (1.06 in)
Do not exceed minimum disc plate thickness.
If the thickness is not within the specification, replace the disc plate.