Active Command Modes Procedure

Active Command Modes Procedure
1. Connect the M-MDS to the DLC-2.





2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
^ When using the IDS (laptop PC)
1. Select "DataLogger".
2. Select "Modules".
3. Select "TPM".
^ When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "TPM".
3. Select "DataLogger".
3. Select the active command modes from the PID table.
4. Perform the active command modes, inspect the operations for each parts.