Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> Mazdaspeed3 L4-2.3L Turbo >> Repair and Diagnosis >> Maintenance >> Fuses and Circuit Breakers >> Relay Box >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Relay Box: Service and Repair

PASSENGER JUNCTION BOX (PJB) REMOVAL/INSTALLATION
1. When replacing the PJB, perform the following:
- PJB configuration

2. Disconnect the negative battery cable.
3. Remove in the order indicated in the table.






4. Install in the reverse order of removal.

Connector A Removal Note




1. Push the release tab in the direction of the arrow.
2. Rotate the lever in the direction of the arrow and remove connector A.

Connector B Removal Note




1. Rotate the lever in the direction of the arrow and remove connector B.

PJB Removal Note




1. Turn the screws counterclockwise to remove the PJB.

NOTE: Screws cannot be removed from the PJB




2. Remove the PJB as shown in the figure.

Connector B Installation Note
1. Install the connector B as shown in the figure.






Connector A Installation Note




1. After connecting the connector, rotate the lever in the direction of the arrow to install connector A.
pro multis · About Operation CHARM