Manifold Pressure/Vacuum Sensor: Service and Repair
MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/BOOST AIR TEMPERATURE SENSOR REMOVAL/ INSTALLATION^ WITH TC]1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the oil level gauge pipe.
4. Disconnect the MAP/boost air temperature sensor connector.
5. Remove MAP/boost air temperature sensor from the intake manifold.
6. Install in the reverse order of removal.
Tightening torque : 5.0 - 7.0 Nm {51 - 71 kgf.cm, 45 - 61 in-lbf}