Freeze Frame Data Table

FREEZE FRAME DATA TABLE

Freeze Frame Data Table (Part 1):

Freeze Frame Data Table (Part 2):

Some unique PIDs are stored in the Keep Alive Memory of the (KAM) of the PCM to help in diagnosing the root cause of misfires. These PIDs are collectively called misfire freeze4rame (MFF) data. These parameters are separate from the generic freeze-frame data that is stored for every MIL code. They are used for misfire diagnosis only. The MFF data could be more useful for misfire diagnosis than the generic freeze frame data. It is captured at the time of the highest misfire rate, and not when the DTC is stored at the end of a 1,000 or 200 revolution block. (Generic freeze-frame data for misfire can be stored minutes after the misfire actually occurred).

NOTE: MFF PIDs are supported on all vehicles but may not be available on all scan tools because enhanced PID access may vary by scan tool manufacturer.

Misfire Freeze-Frame PIDs

Misfire Freeze-Frame PIDs (Part 1):

Misfire Freeze-Frame PIDs (Part 2):