Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> Tribute 4WD L4-2.3L Hybrid >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Doors >> Front Door >> Front Door Panel >> Service and Repair

Front Door Panel: Service and Repair




FRONT DOOR TRIM PANEL REMOVAL/INSTALLATION











NOTE: LH side shown, RH side similar.






1. Remove the door sail panel.

- If equipped, disconnect the power mirror electrical connector.






2. Open and remove the door handle finish panel.

- Pull the door handle outward to fully access the door handle finish panel.






3. Remove the door handle screw.

4. Remove the door inside handle screw.

5. Remove the 3 door trim panel screws.

6. Remove the door trim panel.

- Pull outward and then upward on the door trim panel.
- Disconnect the electrical connectors.






7. Remove the door handle from the door trim panel.

- Disconnect the electrical connector.
- Press the 2 retaining tabs while pushing the door handle from the door trim panel.
- Remove the door handle from the door trim panel by pulling it back through the door trim panel.

8. To install, reverse the removal procedure.

pro multis · About Operation CHARM