Rear Door Panel: Service and Repair

REAR DOOR TRIM PANEL REMOVAL/INSTALLATION











NOTE: LH side shown, RH side similar.






1. Open and remove the door handle finish panel.






2. Remove the door handle screw.

3. Remove the door handle pull cup screw.

4. Remove the 3 door trim panel screws.

5. Remove the door trim panel.

- Pull outward and then upward on the door trim panel.
- Disconnect the electrical connector.

6. Remove the door handle from the door trim panel.

- Press the 2 retaining tabs while pushing the door handle from the door trim panel.
- Remove the door handle from the door trim panel by pulling it back through the door trim panel.

7. To install, reverse the removal procedure.