Instrument Panel Center Finish Panel - Upper Removal/Installation

-
INSTRUMENT PANEL CENTER FINISH PANEL - UPPER REMOVAL/INSTALLATION

1. Position the ignition switch to the OFF position.


NOTE: The ignition switch must be in the OFF position if disconnecting the passenger air bag deactivation (PAD) indicator electrical connector. Otherwise, a DTC will be set in the restraints control module (RCM) memory and must be cleared before releasing the vehicle.

2. Remove the upper instrument panel center finish panel.

- Pull the upper instrument panel center finish panel outward.
- Disconnect the electrical connector.

3. To install, reverse the removal procedure.