Pinpoint Test 5: The Door Lock Control Switch Illumination Is Inoperative
PINPOINT TEST 5: THE DOOR LOCK CONTROL SWITCH ILLUMINATION IS INOPERATIVE
Normal Operation
When the accessory delay relay energizes, voltage is supplied to the door lock control switches through circuit (L), turning on the switch illumination. Switch illumination is grounded through circuit (B/GY).
Possible Causes
- Wiring, terminals or connectors
- Door lock switch
Diagnostic Procedure
CAUTION: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.
