Fog/Driving Lamp: Service and Repair

FOG LAMP REMOVAL/INSTALLATION











NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.
1. With the vehicle in NEUTRAL, see Lifting.

2. Remove the 4 fender splash shield bolts.

- To install, tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.

3. Remove the 4 fender splash shield pin-type retainers.

- Position the fender splash shield aside.

4. Disconnect the fog lamp bulb electrical connector.

5. Release the 3 retainers and remove the fog lamp.

6. To install, reverse the removal procedure.