Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming and Relearning




SEAT WEIGHT SENSOR CALIBRATION

CAUTION:
- If any of the following work is performed, perform the seat weight sensor calibration using the M-MDS.

- Replacement with a new seat weight sensor
- Replacement with a new seat weight sensor control module
- Replacement with new passenger-side seat parts
- Disassembly of the passenger-side seat

- If any of the following work is performed, perform the seat weight sensor inspection using the M-MDS. Component Tests and General Diagnostics

- Removal of the passenger-side seat
- Loosening and retightening of passenger's seat fixing bolts
- Or, the vehicle is involved in a collision

1. Have two 20 kg {44 lb} weights ready to use.

2. Connect the M-MDS to the DLC-2.






3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

- Select "Body".
- Select "Restraints".
- When using the PDS (Pocket PC)

- Select "All Tests and Calibrations".

4. Then, select item from the screen menu in the following order.

- Select "Passenger Seat Weight Sensor ReZero".

5. Perform calibration following the procedures on the M-MDS screen.

NOTE:
- When "Lightly pat the passenger seat cushion" is displayed on the M-MDS screen, lightly pat horizontally approx. five times on the headrest or upper side of the seat back trim of the passenger-side front seat.