Assembly Procedure

Assembly Procedure
1. Measure the spring free length.

Servo return spring (Standard)





^ If not as specified, replace the spring.
2. Install the servo return spring to the transaxle case.





3. Install the servo piston to the transaxle case.





4. Apply ATF to new O-ring and install it to the transaxle case.

O-ring inner diameter:
70.2 mm (2.76 in)





5. Install the servo retainer by tightening the bolts evenly and gradually.

Tightening torque:
11-14 Nm (113-142 kgf-cm, 97.4-123 in. lbf.)