Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2009 >> 3 L4-2.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Gear Sensor/Switch >> Service and Repair >> Neutral Switch Removal/Installation [A26M-R]
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Neutral Switch Removal/Installation [A26M-R]




NEUTRAL SWITCH REMOVAL/INSTALLATION [A26M-R]

1. Disconnect the negative battery cable.

2. Remove the under cover.

3. Disconnect the neutral switch connector.

4. Remove the neutral switch.

5. Install the neutral switch to the transaxle case.

Tightening torque
- 28.1-52.3 Nm {2.9-5.3 kgf-m, 20.8-38.5 ft-lbf}

6. Clamp both the neutral switch and back-up light switch wiring harnesses as shown in the figure.






7. Install the under cover.

8. Connect the negative battery cable.

pro multis · About Operation CHARM