Neutral Switch Removal/Installation [G35M-R]

NEUTRAL SWITCH REMOVAL/INSTALLATION [G35M-R]

1. Remove the under cover.

2. Remove the No.1 engine mount rubber and No.1 engine mount bracket.






3. Remove the neutral switch.






4. Install the neutral switch (with a new packing) to the transaxle case.

Tightening torque
- 19.6-29.4 Nm
{2.0-2.9 kgf-m, 14.5-21.6 ft-lbf}

5. Install the No.1 engine mount bracket.






Tightening torque
- 93.1-116.6 Nm
{9.5-11.8 kgf-m, 68.7-85.9 ft-lbf}

6. Install the No.1 engine mount rubber. Manual Transaxle Removal/Installation [G35M-R]

7. Install the under cover.