Transaxle Oil Inspection [A26M-R]

TRANSAXLE OIL INSPECTION [A26M-R]

1. Park the vehicle on level ground.

2. Remove the under cover.

3. Remove the oil level plug and washer.






4. Verify that the oil is near the brim of the plug port.

- If the oil level is low, add the specified amount and type of oil through the filler plug hole.

Manual transaxle oil Grade
- API Service GL-4 or GL-5

Manual transaxle oil Viscosity
- All-season: SAE 75W-90

5. Tighten the oil level plug with a new washer.

Tightening torque
- 27.5-50.9 Nm {2.8-5.1 kgf-m, 37.5-20.2 ft-lbf}

6. Install the under cover.