Center Panel Lower Removal/Installation

CENTER PANEL LOWER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Upper panel Upper Panel Removal/Installation

b. Decoration panel Decoration Panel Removal/Installation

c. Shift knob (MTX) Service and Repair

d. Shift panel Shift Panel Removal/Installation

3. Pull the center panel lower in the direction of the arrow(1) shown in the figure while detaching clips.






4. Pull the center panel lower in the direction of the arrow(2) shown in the figure and remove it while detaching clips and hooks.

5. Disconnect the PAD indicator light bulb connector. (Vehicles with PAD indicator light bulb)

6. Disconnect the seat warmer switch connector. (Vehicles with seat warmer)

7. Disconnect the advanced keyless entry and push button start connector. (Vehicles with advanced keyless entry and push button start system)

8. Disconnect the accessory socket (front) connector.

9. Disconnect the cigarette lighter socket connector. (GCC specs.)

10. Install in the reverse order of removal.